LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2015 >> Durango SXT, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 144 (Exhaust System) >> Resonator, Exhaust >> Removal >> Single Muffler/Resonator

Single Muffler/Resonator

WARNING: This page is about a different car, the 2016 Dodge Durango. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Single Exhaust Systems, Muffler, Resonator And Tailpipe
GC0144313Courtesy of CHRYSLER GROUP, LLC
NOTE:

On single exhaust systems, the muffler, resonator and tailpipe (4) are one single unit.

  1. Apply penetrating oil to band clamp nut and bolt (4).
  2. Remove ground straps.
  3. Support the exhaust system with a stand.
  4. Remove the muffler/resonator assembly from the catalytic converter down pipes at the clamps (4).
    CAUTION:

    Do not use any tools to remove the rubber isolators-remove by hand only. Soapy water or silicone based lubricant spray may be used to assist removal/installation of isolators. DO NOT use a petroleum based lubricant on the isolators, as damage to the rubber material can occur.

  5. Remove the isolators (2).
  6. Remove the muffler/resonator assembly.
scientia non olet · About LEMON Manuals