LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2015 >> Durango SXT, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 137 (Front Suspension & Wheel Alignment) >> Front >> Link, Stabilizer Bar >> Removal >> Removal

Link, Stabilizer Bar: Removal: Removal

WARNING: This page is about a different car, the 2016 Dodge Durango. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
    Fig 1: Stabilizer Link & Nuts
    GC0173569Courtesy of CHRYSLER GROUP, LLC
  2. Remove and discard the stabilizer link lower nut (4).
  3. Remove and discard the stabilizer link upper nut.
  4. Remove the stabilizer link (6).
scientia non olet · About LEMON Manuals