Hub And Bearing: Removal: 4X2
WARNING: This page is about a different car, the 2016 Dodge Durango. However, it is still accessible from the selected car via links, so may be relevant.
- Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
- Remove the wheel and tire assembly.
- Remove the brake rotor. Refer to ROTOR, BRAKE, REMOVAL .
- Remove the wheel speed sensor bolt (1) and remove the wheel speed sensor from the knuckle (2).
- Remove the 3 hub bearing mounting bolts (3) from the back of the steering knuckle (2). Remove hub bearing from the steering knuckle (2).