LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2015 >> Durango SXT, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 135 ((Antilock Brake System (Abs) - Electrical Diagnostics)) >> DTC Troubleshooting >> C1223-01-Brake Pedal Travel Sensor Supply - General Electrical Failure >> Set Condition

Set Condition

WARNING: This page is about a different car, the 2016 Dodge Durango. However, it is still accessible from the selected car via links, so may be relevant.

When the Anti-lock Brake System (ABS) Module detects that the Brake Pedal Position (BPP) Sensor is indicating less than 4.75 volts or greater than 5.25 volts for more than 500 msec. The BCM has a 15 sec debounce, except at power-up when it is two seconds if the fluid was low on the previous ignition cycle.