Section 134 (Charging System (Service Information)): Generator: Removal: 3.6L
WARNING: This page is about a different car, the 2016 Dodge Durango. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect and isolate the negative battery cable
- Unplug the field circuit (3) from generator.
- Remove the B+ terminal nut (1) and wire (2).
- Remove the serpentine belt. Refer to BELT, SERPENTINE, REMOVAL .
- Remove the lower front generator mounting retainer (5).
- Remove the three mounting retainers.
- Remove the generator from the vehicle.