LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2015 >> Durango SXT, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 133 (Heating & Air Conditioning (Service Information)) >> Controls >> Sensor, Temperature, Air Outlet >> Removal >> Right Floor

Right Floor

WARNING: This page is about a different car, the 2016 Dodge Durango. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect and isolate the negative battery cable.
  2. Remove the right side silencer panel to gain access to the air outlet temperature sensor, located on the right side floor duct.
    Fig 1: Air Outlet Temperature Sensor Wire Harness Connector
    GC0158351Courtesy of CHRYSLER GROUP, LLC
  3. Disconnect the HVAC wire harness (1) from the air outlet temperature sensor (2).
  4. Using Trim Stick (special tool #C-4755, Trim Stick) or equivalent, disengage the air duct temperature sensor from the right side floor duct and remove the sensor.
scientia non olet · About LEMON Manuals