LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2015 >> Durango SXT, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 132 (3.6L Engine (Service Information)) >> Valve Timing >> Standard Procedure >> Resetting Left Cam Chain TENSIONER >> Engine Timing Cover Installed

Engine Timing Cover Installed

WARNING: This page is about a different car, the 2016 Dodge Durango. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Using Chain Tensioner Pin To Lift Pawl Off Of Rack
GC0173699Courtesy of CHRYSLER GROUP, LLC
  1. Using the (special tool #2025003090, Pin, Chain Tensioner), lift the pawl off of the rack (1).
    Fig 2: Holding Pawl Off Rack & Pushing Timing Chain Tensioner Holder Into Place
    GC0173764Courtesy of CHRYSLER GROUP, LLC
  2. While holding the pawl off of the rack, push (special tool #2025001090, Holder, Timing Chain Tensioner, Left-Front) (1) into place between the cylinder head and the cam chain guide to force the rack and piston back into the tensioner body. The holder must remain in place during service to keep the rack and piston in the retracted position.
scientia non olet · About LEMON Manuals