LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2015 >> Durango SXT, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 132 (3.6L Engine (Service Information)) >> Lubrication >> Pick-Up, Oil Pump >> Removal >> Removal

Pick-Up, Oil Pump: Removal: Removal

WARNING: This page is about a different car, the 2016 Dodge Durango. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Oil Pick-Up Tube & Bolts
GC0145016Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect and isolate the negative battery cable.
  2. Remove the oil pan Refer to PAN, OIL, REMOVAL .
  3. Remove the bolt (3) from the oil pump pick-up tube support bracket.
  4. Remove the bolt (2) from the oil pick-up tube and remove the oil pick-up tube (1) from the oil pump.
    Fig 2: Oil Pick-Up Tube O-Ring Seal
    GC0145015Courtesy of CHRYSLER GROUP, LLC
  5. Remove and discard the O-ring seal (1) from the oil pick-up tube.
scientia non olet · About LEMON Manuals