Bottle, Pressurized Coolant: Installation: Installation

WARNING: This page is about a different car, the 2016 Dodge Durango. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Coolant Bottle Bolts

Courtesy of CHRYSLER GROUP, LLC

Install the pressurized coolant bottle and tighten the bolts (2) to the proper specification. Refer to SPECIFICATIONS .

Fig 2: Coolant Vent Hose, Inlet Hose & Outlet Hose
Courtesy of CHRYSLER GROUP, LLC
Install the coolant outlet hose (3).
Install the coolant inlet hose (2).
Remove the coolant vent hose (1).

Fig 3: Hood Seal
Courtesy of CHRYSLER GROUP, LLC
Install the hood seal (1).
Fill the cooling system. Refer to STANDARD PROCEDURE .