LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2015 >> Durango SXT, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 130 (Engine Cooling System) >> Accessory Drive >> TENSIONER, Belt >> Installation >> 5.7L

TENSIONER, Belt: Installation: 5.7L

WARNING: This page is about a different car, the 2016 Dodge Durango. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Tensioner Assembly & Bolt
GC0144301Courtesy of CHRYSLER GROUP, LLC
  1. Align locator tang on tensioner with slot in front cover.
  2. Install tensioner and mounting bolt (3) to front cover. Tighten bolt to 41 N.m (30 ft. lbs.).
  3. Install accessory drive belt. Refer to BELT, SERPENTINE, INSTALLATION .
  4. Install the air intake system. Refer to BODY, AIR CLEANER, INSTALLATION, 5.7L .
  5. Connect the negative battery.
scientia non olet · About LEMON Manuals