LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2015 >> Durango SXT, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 130 (Engine Cooling System) >> Accessory Drive >> Pulley, Idler >> Removal >> 3.6L

Pulley, Idler: Removal: 3.6L

WARNING: This page is about a different car, the 2016 Dodge Durango. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the serpentine belt. Refer to BELT, SERPENTINE, REMOVAL .
    Fig 1: Idler Pulley Bolt
    GC0173660Courtesy of CHRYSLER GROUP, LLC
  2. Remove bolt (1) and the idler pulley.
scientia non olet · About LEMON Manuals