LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2015 >> Durango SXT, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 130 (Engine Cooling System) >> Accessory Drive >> Pulley, Idler >> Installation >> 5.7

Pulley, Idler: Installation: 5.7

WARNING: This page is about a different car, the 2016 Dodge Durango. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Idler Pulley - 5.7L
GC0144931Courtesy of CHRYSLER GROUP, LLC
  1. Position idler pulley (1).
  2. Tighten bolt (2) to 29 N.m (21 ft. lbs.).
  3. Install accessory drive belt. Refer to BELT, SERPENTINE, INSTALLATION .
scientia non olet · About LEMON Manuals