5.7L Engine
WARNING: This page is about a different car, the 2016 Dodge Durango. However, it is still accessible from the selected car via links, so may be relevant.
| 1 - POWER STEERING PUMP PULLEY |
| 2 - ACCESSORY DRIVE BELT |
| 3 - A/C COMPRESSOR PULLEY |
| 4 - CRANKSHAFT PULLEY |
| 5 - GENERATOR PULLEY |
| 6 - IDLER PULLEY |
| 7 - WATER PUMP PULLEY |
| 8 - AUTOMATIC BELT TENSIONER |
- Remove the air intake tube between intake manifold and air filter assembly.
- Using a suitable square drive tool, release the belt tension by rotating the tensioner (8)clockwise . Rotate belt tensioner (8) until belt (2) can be removed from pulleys.
- Remove belt (2).
- Gently release tensioner (8).