5.7L Engine
WARNING: This page is about a different car, the 2016 Dodge Durango. However, it is still accessible from the selected car via links, so may be relevant.
| 1 - POWER STEERING PUMP PULLEY |
| 2 - ACCESSORY DRIVE BELT |
| 3 - A/C COMPRESSOR PULLEY |
| 4 - CRANKSHAFT PULLEY |
| 5 - GENERATOR PULLEY |
| 6 - IDLER PULLEY |
| 7 - WATER PUMP PULLEY |
| 8 - AUTOMATIC BELT TENSIONER |
NOTE:
When installing accessory drive belt onto pulleys, make sure that belt is properly routed and all V-grooves make proper contact with pulleys.
- Position the drive belt (2) over all pulleys except for the water pump pulley (7).
- Rotate tensioner (8) clockwise and slip the belt (2) over the water pump pulley (7).
- Gently release tensioner (8).
- Install the air intake tube between intake manifold and air filter assembly.