LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2015 >> Durango SXT, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 119 (Body - Interior & Exterior) >> Interior >> Panel, B-Pillar Trim, Upper >> Removal >> Removal

Panel, B-Pillar Trim, Upper: Removal: Removal

WARNING: This page is about a different car, the 2016 Dodge Durango. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Front Seat Belt Lower Anchor Cover, Front Seat Cushion Outboard Side Shield, Screw & Seat Belt Lower Anchor
GC0145727Courtesy of CHRYSLER GROUP, LLC
  1. Adjust the front seat to its most forward position for easiest access to the front seat belt lower anchor cover (2) and the B-pillar trim.
  2. Grasp the upper edge of the lower anchor cover and pull it carefully upward and outward to unsnap it from the front seat cushion outboard side shield (4).
  3. Remove the screw (1) that secures the seat belt lower anchor (3) to the outboard side of the front seat cushion frame.
    Fig 2: Retaining Clips & Upper Trim
    GC0146034Courtesy of CHRYSLER GROUP, LLC
  4. Remove the lower B-pillar trim. Refer to PANEL, B-PILLAR TRIM, LOWER, REMOVAL .
  5. Using a trim stick (special tool #C-4755, Trim Stick) or equivalent, disengage the retaining clips (2) that secure the upper trim (3) to the pillar and remove the trim panel.
  6. Remove the seat belt from the trim.
scientia non olet · About LEMON Manuals