Switch, Heated Seat: Operation: Rear
WARNING: This page is about a different car, the 2016 Dodge Durango. However, it is still accessible from the selected car via links, so may be relevant.
The two rear heated seat switches are momentary, push button-type switches, that provide a hard-wired resistance signal to the Heated Seat Module (HSM), signaling it to energize the heating elements for the selected seat. Light Emitting Diodes (LED) in each switch indicate the level of heat in use. The rear seat switch LEDs are controlled by the HSM.
The rear heated seat switches are diagnosed using a scan tool. Refer to DIAGNOSIS AND TESTING .
The rear heated seat switches cannot be adjusted or repaired and if a switch or its LEDs are damaged or inoperative, the entire switch must be replaced.