Cluster Mask, Hood And Lens

Fig 1: Six Screw, Cluster Housing & Integrated Latches

Courtesy of CHRYSLER GROUP, LLC

Disconnect and isolate the negative battery cable.
Remove the instrument cluster from the instrument panel.
Remove the six screw (4) that secure the hood and mask to the cluster housing (1).
Working around the perimeter of the cluster housing, disengage the integrated latches (2) that secure the cluster mask to the cluster housing.
Remove the cluster mask from the face of the instrument cluster.
NOTE:
The lens assemblies for this vehicle can be serviced separately from side to side.
To remove the lens and hood assemblies, disengage the integrated latches that secure the assembly to the cluster housing, and remove.