LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2013 >> Journey Crew, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Body - Interior & Exterior >> Seats, Front >> Seat Back, Front >> Removal >> Removal

Seat Back, Front: Removal: Removal

NOTE:

Refer to DESCRIPTION  for detailed exploded views.

NOTE:

All call outs are in reference to the Driver Power exploded view unless otherwise noted.

  1. Remove the seat from the vehicle. Refer to SEAT, FRONT, REMOVAL  .
  2. Remove the lift handle cover (24 - Driver Manual) and mounting fasteners (26 - Driver Manual), if equipped.
  3. Remove the lift handle (23 - Driver Manual), if equipped.
  4. Carefully pry the side shield away from the recliner handle (26) and remove the retaining clip.
  5. Remove the recliner handle.
  6. Remove the rear fastener (31) from the outboard shield (25).
  7. Starting at the rear of the outboard shield, carefully pry the side shield until the retainers disengage and slide the shield forward to remove.
  8. Remove the seat buckle bolt and buckle (40).
  9. Remove the rear fastener (31) from the inboard shield (42).
  10. Starting at the rear of the inboard shield, carefully pry the side shield until the retainers disengage and slide the shield forward to remove.
  11. Remove the airbag wiring harness (24) from the seat bottom, ensure the harness is completely removed from the bracket (26) and through recliner mechanism.
  12. Remove the outboard and inboard seat back bolts (30).
  13. Remove the seat back from the seat cushion assembly.
scientia non olet · About LEMON Manuals