Cable, Shift: Removal: Removal

WARNING: This page is about a different variant/trim than selected.

Fig 1: Center Console

Courtesy of CHRYSLER GROUP, LLC

Disconnect battery negative cable.
Remove the center console. Refer to CONSOLE, CENTER, REMOVAL .

Fig 2: Identifying Shift Cable AT Shifter
Courtesy of CHRYSLER GROUP, LLC
Disconnect and remove gearshift cable (2, 3) from shift mechanism.
Remove the air bag module and the dynamics sensor . Refer to MODULE, OCCUPANT RESTRAINT CONTROLLER, REMOVAL .
Remove the shift cable at the transmission and pull cable through.