LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2012 >> Journey SE >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 13 ((Powertrain Control Module (Pcm) - Electrical Diagnostics - 62TE Automatic Transmission)) >> DTC Troubleshooting >> P0602-Control Module Programming Error/Not Programmed >> Theory Of Operation

Theory Of Operation

WARNING: This page is about a different variant/trim than selected.

The controller is programmed during manufacturing with generic software to facilitate testing. This software does not have the proper calibrations to control a transmission in a vehicle. The check for generic software is made at power-up. If generic software is found, the MIL will light immediately and the MIL will stay on even if the fault is cleared, until the proper software is installed. Note: Transmission will be placed in limp-in mode.