LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2012 >> Charger AWD V8-5.7L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Drive Belts, Mounts, Brackets and Accessories >> Engine Mount >> Service and Repair >> Engine Mount Insulator - Removal >> Rear

Rear






REMOVAL

AUTOMATIC TRANSMISSION





1. Raise and support the vehicle.
2. Using a suitable jack, support the transmission.
3. Remove the rear transmission mount isolator bolts (2).
4. Remove the rear cross member retaining bolts (1,3) and remove the cross member (4).





5. Remove the rear transmission mount isolator (3) retaining bolts (1) and remove the isolator.





6. If required, remove the rear transmission mount bracket (2) retaining bolts (1) and remove the bracket.

MANUAL TRANSMISSION





1. Raise and support the vehicle.
2. Using a suitable jack, support the transmission.
3. Remove the rear transmission mount isolator nuts (1).
4. Remove the rear cross member retaining bolts (2) and remove the cross member.





5. Remove the rear transmission mount isolator (2) retaining bolts (1) and remove the isolator.

scientia non olet · About LEMON Manuals