Pressure Hose - RHD

GAS ENGINE - RIGHT-HAND-DRIVE






NOTE: Before proceeding, Service Precautions .

1. Siphon as much fluid as possible from the power steering fluid reservoir.
2. Remove the engine appearance cover.
3. Remove the pressure Hose (3) at the pump pressure port (5).
4. Remove the pressure hose routing bracket bolt (2) at the upper mount (8).





5. Raise and support the vehicle. Maintenance
6. Unthread the tube nut (2) and remove the pressure hose at the steering gear.
7. Remove the power steering pressure hose from the vehicle.