LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2012 >> Caliber L4-2.4L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Seals and Gaskets >> Front Crankshaft Seal >> Service and Repair >> Front Crankshaft Oil Seal - Removal

Front Crankshaft Oil Seal - Removal






REMOVAL

Special Tools:










1. Remove accessory drive belt.
2. Install damper holder (1) and remove damper retaining bolt.
3. Pull damper off crankshaft.





4. Remove front crankshaft oil seal (1) by prying out with a screw driver (2). Be careful not to damage the cover seal surface.

scientia non olet · About LEMON Manuals