LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2012 >> Caliber L4-2.4L >> Repair and Diagnosis >> Body and Frame >> Interior Moulding / Trim >> Trim Panel >> Service and Repair >> Shifter Housing - Installation

Shifter Housing - Installation






INSTALLATION





1. Connect center console housing wire connector (2) with instrument panel connector (3).
2. Place console housing (1) over shifter lever ensuring console tabs seat properly.





3. Install screws (1).
4. Replace shift bezel and knob. Shifter Bezel - Installation Shifter Bezel - Installation.

scientia non olet · About LEMON Manuals