LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2012 >> Caliber L4-2.4L >> Repair and Diagnosis >> Body and Frame >> Doors, Hood and Trunk >> Trunk / Liftgate >> Trunk / Liftgate Handle >> Service and Repair >> Exterior Handle Lamp Bar- Installation

Exterior Handle Lamp Bar- Installation






INSTALLATION





1. Connect wire connector (2).
2. Connect cable to light bar handle.
3. Align light bar studs through liftgate holes.
4. Install nuts to light bar studs.
5. Install liftgate lower trim panel.Liftgate Trim Panel - Installation
6. Install liftgate side moldings.
7. Install liftgate upper molding.

scientia non olet · About LEMON Manuals