LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2012 >> Caliber L4-2.4L >> Repair and Diagnosis >> Body and Frame >> Doors, Hood and Trunk >> Trunk / Liftgate >> Trunk / Liftgate Handle >> Service and Repair >> Exterior Handle Lamp Bar - Removal

Exterior Handle Lamp Bar - Removal






REMOVAL





1. Remove liftgate upper molding.
2. Remove liftgate upper side molding.
3. Remove liftgate lower molding.Liftgate Trim Panel - Removal
4. Remove nuts from light bar studs.
5. Disconnect wire connector.
6. Disconnect cable from handle.

scientia non olet · About LEMON Manuals