LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2012 >> Caliber L4-2.4L >> Repair and Diagnosis >> Body and Frame >> Bumper >> Rear Bumper >> Rear Bumper Reinforcement >> Service and Repair >> Rear Bumper Reinforcement - Installation

Rear Bumper Reinforcement - Installation






INSTALLATION





1. Place bumper reinforcement (2) up to frame locations.
2. Install seven nuts (1) and tighten to 23 Nm (204 in. lbs.)
3. Install fascia. Rear Bumper Fascia - Installation.

scientia non olet · About LEMON Manuals