LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2012 >> Caliber L4-2.4L >> Repair and Diagnosis >> Accessories and Optional Equipment >> Radio, Stereo, and Compact Disc >> Radio/Stereo >> Service and Repair >> Removal and Replacement >> Radio - Installation

Radio - Installation






INSTALLATION





1. Connect the wire harness connectors and antenna cable(s) to radio.
2. Insert the radio into the instrument panel.
3. Install the mounting fasteners. Tighten to 2 Nm (20 in. lbs.).
4. Install the instrument panel center bezel. Instrument Panel Center Bezel - Installation.
5. Connect the battery negative cable.

NOTE: REQ RADIO, After installation of the radio, remove the radio from "Transportation Mode" by pulling the IOD fuse or using the scan tool and perform a battery reset.

scientia non olet · About LEMON Manuals