LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2011 >> Journey Crew, AWD >> Repair and Diagnosis >> Electrical >> Gauges >> Body - Interior & Exterior >> Diagnosis And Testing >> Water Leaks >> Repair Procedure For Bulkhead/Cowl Seams

Repair Procedure For Bulkhead/Cowl Seams

  1. If the customer experiences a wet floor  at the front of the vehicle remove the instrument panel. Refer to PANEL, INSTRUMENT, REMOVAL .
  2. Remove the Cowl Trim. Refer to PANEL, COWL TRIM, REMOVAL .
    Fig 1: Bulkhead and Cowl seam sealer
    GC0148104Courtesy of CHRYSLER LLC
  3. Inspect all Bulkhead (1) and Cowl (2) body seams for seam sealer skips.
  4. Apply Paintable Clear Seam Sealer to all seam sealer voids.
  5. Re-Install the instrument panel. Refer to PANEL, INSTRUMENT, INSTALLATION .
  6. Re-Install the Cowl Trim. Refer to PANEL, COWL TRIM, INSTALLATION .
scientia non olet · About LEMON Manuals