Installation

INSTALLATION





1. On models equipped with A/C, refer to the A/C Condenser installation procedure.A/C Condenser - Installation
2. On non A/C equipped models, position the transmission oil cooler (3) to the radiator.
3. Install the transmission oil cooler mounting bolts (2). Tighten the bolts to 8 Nm (70 in. lbs.).
4. Connect the transmission cooler lines to the transmission oil cooler (1). Service and Repair
5. Install the lower closeout panel.
6. Lower the vehicle.
7. Start engine and check transmission fluid level. Adjust level as necessary.