Front Position Lamp - Export

Fig 1: Front Splash Shield Fasteners

Courtesy of CHRYSLER LLC

Disconnect and isolate the battery negative cable.
Hoist vehicle.
Working in the appropriate wheel well, loosen up the front of the splash shield, but don't fully remove it. Refer to SHIELD, Splash, Front Wheel House , Removal SHIELD, Splash, Rear Wheelhouse , Removal .

Fig 2: BUX Lamp Rear COMP View
Courtesy of CHRYSLER LLC
Looking up through the front wheel well, locate the front position lamp (3).
Grasp the front position lamp (3) twist 1/4 turn counterclockwise, and pull straight out of front lamp unit.
Pull bulb straight from its socket.