LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2009 >> Durango 4WD V8-4.7L >> Repair and Diagnosis >> Steering and Suspension >> Suspension >> Stabilizer Bar >> Stabilizer Link >> Service and Repair >> Front Stabilizer Bar Link - Installation

Front Stabilizer Bar Link - Installation






INSTALLATION





1. Install the stabilizer link (7) to the vehicle.
2. Install the retainers, grommets and upper nut to the stabilizer bar (6) and Tighten to 54 Nm (40 ft. lbs.).
3. Install the lower nut and Tighten to 169 Nm (125 ft. lbs.).
4. Remove the support and lower the vehicle.

scientia non olet · About LEMON Manuals