LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2009 >> Durango 4WD V8-4.7L >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - Power and Ground Distribution >> Relay Box >> Service and Repair >> Power Distribution Center (PDC) - Removal

Power Distribution Center (PDC) - Removal






REMOVAL





1. Disconnect and isolate the battery negative cable.
2. Depress retaining tabs on the side on the PDC (1).
3. Disconnect electrical harness connectors (2) and remove PDC.

scientia non olet · About LEMON Manuals