LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2009 >> Durango 4WD V8-4.7L >> Repair and Diagnosis >> Heating and Air Conditioning >> Relays and Modules - HVAC >> Blower Motor Relay >> Service and Repair >> Front Blower Motor Relay - Removal

Front Blower Motor Relay - Removal






REMOVAL





1. Disconnect and isolate the negative battery cable.
2. Locate the power distribution center (PDC) (1).
3. Open the PDC cover (2).

NOTE: Refer to the fuse and relay layout map on the inner surface of the PDC cover for rear blower motor relay identification and location.

4. Remove the rear blower motor relay (3) from the PDC.

scientia non olet · About LEMON Manuals