LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2009 >> Durango 4WD V8-4.7L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Engine Lubrication >> Oil Pressure Switch (For Fuel Pump) >> Service and Repair >> Oil Pressure Switch - Installation

Oil Pressure Switch - Installation






INSTALLATION





1. Install oil pressure sender (2).
2. Connect oil pressure sender wire (4).
3. Install front splash shield.
4. Lower vehicle.
5. Connect the negative battery cable.

scientia non olet · About LEMON Manuals