LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2009 >> Durango 4WD V8-4.7L >> Repair and Diagnosis >> Brakes and Traction Control >> Power Brake Assist >> Brake Booster Vacuum Sensor >> Service and Repair >> Brake Vacuum Sensor - Installation

Brake Vacuum Sensor - Installation






INSTALLATION





1. Install vacuum sensor (1) to the power brake booster.





2. Connect wiring harness (1) connector to vacuum sensor.
3. Perform Verification Test and clear any faults. Testing and Inspection.

scientia non olet · About LEMON Manuals