LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2009 >> Durango 4WD V8-4.7L >> Repair and Diagnosis >> Brakes and Traction Control >> Hydraulic System >> Brake Caliper >> Service and Repair >> Removal and Replacement >> Disc Brake Caliper Adapter - Installation >> Rear

Rear






REAR





1. Install the caliper adapter mounting bolts (4). Tighten the mounting bolts to 135 Nm (100 ft.lbs).
2. Install the anti-rattle clips (2).
3. Install the inboard and outboard pads (1).
4. Install the caliper mounting bolts.
5. Install the tire and wheel assembly.

scientia non olet · About LEMON Manuals