LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2009 >> Durango 4WD V8-4.7L >> Repair and Diagnosis >> Brakes and Traction Control >> Disc Brake System >> Brake Caliper >> Service and Repair >> Removal and Replacement >> Disc Brake Caliper Adapter - Installation >> Front

Front






FRONT





1. Install the caliper adapter (1) to the steering knuckle.
2. Install the caliper adapter mounting bolts (2) and tighten to 176 Nm (130 ft.lbs.).
3. Install the disc brake caliper (1)Disc Brake Caliper - Installation.
4. Install the tire and wheel assembly Removal and Replacement.
5. Remove the support and lower the vehicle.

scientia non olet · About LEMON Manuals