Sunroof Motor - Installation

INSTALLATION










CAUTION: The sunroof motor must be timed with the sunroof assembly. Failure to do so will result in improper sunroof operation and possible leakage or damage to the assembly.

1. Assure proper sunroof motor timing before installation Adjustments.
2. Position the sunroof motor (9) to the sunroof assembly, install the retaining screws (10) and tighten to 4 Nm (40 in. lbs.).
3. Connect the timed sunroof assembly to a power source and initialize. Programming and Relearning.
4. Assure proper operation before installing the sunroof assembly into the vehicle.