Floor Console - Removal

REMOVAL

NAFTA Vehicles





1. Remove the rubber cup holder liners.
2. Remove the front (1), center (2) and rear screws (3).
3. Lift the floor console up and disconnect the electrical connector (4).
4. Slide the floor console back and remove.

Export Vehicles





1. Using trim stick C-4755 or equivalent, separate the clips securing the storage bin (1) to the console and remove the storage bin assembly.
2. Remove the front (1), center (3) and rear screws (2).
3. Lift the floor console up and disconnect the electrical connector (4).
4. Slide the floor console back and remove.