Hinge - Installation

INSTALLATION






NOTE: A suitable body sealant should be used when removing or moving the hinges.

1. If necessary, paint replacement hinge before installation.
2. Install the hinge (2) and install the body bolts (1).
3. Tighten the bolts to 28 Nm (21 ft. lbs.).





4. Install the liftgate bolts (2) and tighten to 28 Nm (21 ft. lbs.).
5. Adjust liftgate if necessary. Liftgate - Adjustments
6. Position the upper rear headliner trim and seat fully.