Hood - Installation
INSTALLATION
1. Position the hood (1) onto the hinges (2).
2. Align all marks and install the nuts.
3. Tighten the nuts too 23 Nm (17 ft. lbs.).
4. Connect the washer hoses.
5. Close hood and adjust as necessary. Adjustments
INSTALLATION
1. Position the hood (1) onto the hinges (2).
2. Align all marks and install the nuts.
3. Tighten the nuts too 23 Nm (17 ft. lbs.).
4. Connect the washer hoses.
5. Close hood and adjust as necessary. Adjustments