LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2009 >> Durango 4WD V8-4.7L >> Repair and Diagnosis >> Body and Frame >> Bumper >> Front Bumper >> Service and Repair >> Front Bumper - Installation

Front Bumper - Installation






INSTALLATION





1. Install the bumper support (1) and install the nuts (2).
2. Tighten the nuts to 109 Nm (80 ft. lbs.).
3. Install the front bumper. Front Bumper Fascia - Installation.

scientia non olet · About LEMON Manuals