C1078

C1078-TIRE REVOLUTIONS RANGE PERFORMANCE

For a complete wiring diagram, refer to the Wiring Information Electrical Diagrams.

- When Monitored:
Continuous.

- Set Condition:
Programmed value for tire size is not within acceptable range.





INCORRECT VALUE PROGRAMMED INTO ABM





NOTE: ABM initialization procedure needs to be run for the new tire size to be accepted.

1. Verify the correct Tire/wheel information is programmed in the ABM.

Is the correct value programmed in the ABM according to the chart?

Yes

- Test complete.
- Perform ABS VERIFICATION TEST ABS Verification Test.

No

- Program the correct Tire/Wheel information in the ABM.
- Perform ABS VERIFICATION TEST ABS Verification Test.