LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2009 >> Caliber L4-2.4L >> Repair and Diagnosis >> Transmission and Drivetrain >> Manual Transmission/Transaxle >> Shift Linkage >> Shift Rail >> Service and Repair >> Shift Rail Bushing(s) - Removal

Shift Rail Bushing(s) - Removal






REMOVAL










1. Thread Remover 6786 (1) into shift rail bushing.
2. Install slide hammer C-3752 (2) onto tool.
3. Remove bushing (3) using slide hammer and tool assembly.

scientia non olet · About LEMON Manuals