Power Steering Cooler - Removal

REMOVAL

NOTE: Before proceeding, Service Precautions .





1. Siphon as much fluid as possible from the power steering fluid reservoir.
2. Raise and support the vehicle. Service and Repair.
3. Remove right front wheel mounting nuts and the tire and wheel assembly.
4. Remove the right front splash shield Splash Shield - Removal
5. Remove the hose clamps (2) attaching the fluid return hose (1) to the power steering fluid cooler line. Separate the return hose from the cooler line (4).
6. Remove the cooler tubes from the clips (3) on the side of the frame rail.
7. Remove the cooler lines (4) from the vehicle.