LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2009 >> Caliber L4-2.4L >> Repair and Diagnosis >> Sensors and Switches >> Sensors and Switches - Cooling System >> Engine - Coolant Temperature Sensor/Switch >> Description and Operation >> Engine Coolant Temperature Sensor - Description

Engine Coolant Temperature Sensor - Description






GAS ENGINE










In the gas engine, there are two engine coolant sensors (ETC). One ETC (1) is located in the coolant adapter and one (ECT) sensor (1) that threads into the cylinder block. New sensors have sealant applied to the threads.

In the turbocharged engine there is one ETC located in the coolant adapter.










The ECT Sensor is a Negative Thermal Coefficient (NTC) Sensor. The resistance of the ECT Sensor changes as coolant temperature changes. This results in different input voltages to the PCM. The PCM also uses the ECT Sensor input to operate the radiator cooling fan(s), and send a message over the PCI bus to the instrument cluster for temperature gauge operation.