Defroster Duct - Installation

INSTALLATION

NOTE: LHD model shown. RHD model similar.






NOTE: Illustration shown with instrument panel removed from vehicle for clarity.

1. Position the defroster duct (2) to the front of the instrument panel (6).
2. Reposition the defroster duct support (4) to the instrument panel and install the two retaining screws (1). Tighten the screws to 3 Nm (27 in. lbs.).
3. Install the two screws (3) that secure the defroster duct to the defroster duct support. Tighten the screws to 2.2 Nm (20 in. lbs.).
4. Connect the left demister duct (7) and the right demister duct (5) to the defroster duct.
5. Install the instrument panel top cover Instrument Panel Cover - Installation.