LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2009 >> Caliber L4-2.4L >> Repair and Diagnosis >> Body and Frame >> Interior Moulding / Trim >> Console >> Service and Repair >> Center Console - Removal

Center Console - Removal






REMOVAL





1. Pull back on parking brake (5) to the upright position.
2. Open console door and remove two screws (1) fastening console to rear floor bracket (3).
3. Carefully pry up until the retainers (1) disengage from the center console to front floor bracket (6).
4. Disconnect center console wire connector (2) to instrument panel connector.
5. Remove from vehicle.