LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2009 >> Avenger L4-2.4L >> Repair and Diagnosis >> Body and Frame >> Sensors and Switches - Body and Frame >> Door Lock Cylinder Switch >> Service and Repair >> Door Lock Cylinder Switch - Installation

Door Lock Cylinder Switch - Installation






INSTALLATION

1. Install the Door Cylinder Lock Switch onto the door lock cylinder.
2. Connect the wiring clip and pigtail wire connector.
3. Install door trim panel Front Door Trim Panel - Installation.
4. Connect the battery negative cable.
scientia non olet · About LEMON Manuals